Direct answer
A dual-85 engineering plastics supplier should be qualified on controlled material data, not a headline claim of “1000 hours.” The supplier should identify the exact grade, color, specimen thickness, pre-conditioning, aging equipment, test standard, property measured and acceptance criterion. For an EV battery component, the qualification package should connect 85°C / 85% RH aging to mechanical retention, electrical insulation, flame performance, appearance and dimensional stability on a representative molded part.
This article provides a practical supplier audit matrix. It is written for material engineers, quality teams and sourcing managers who need to compare a controlled CCS bracket material route or another battery-pack component without relying on a marketing statement.
Define the component failure mode first
Dual-85 aging is not a single property test. It is an environmental exposure that can cause several different failures:
- Hydrolysis of the polymer matrix
- Loss of impact strength or elongation
- Cracking around inserts, ribs or assembly points
- Dimensional movement and warpage
- Loss of insulation resistance
- Surface changes, blooming or color shift
- Reduced flame margin after aging
The supplier should know which failure mode controls the application. A CCS bracket may be dominated by impact retention, dimensional stability and insulation. An NTC bracket may place more emphasis on rigidity, insert molding and electrical isolation. A thin battery cover may require film integrity, dielectric strength and resistance to handling damage.
The material family should follow the failure mode. A glass-fiber PA66 route can provide stiffness for an NTC bracket and structural component, while a flame-retardant PC/ABS route may be more suitable for a CCS bracket or cover where impact and electrical performance matter together.
Require a traceable grade definition
“PA66,” “PC/ABS” or “flame-retardant PC” is not enough to approve a material. The controlled definition should include:
- Commercial grade and color code
- Polymer family and reinforcement content
- Flame-retardant system and restricted-substance status
- Heat stabilizer or hydrolysis package
- Impact modifier or compatibilizer
- Density and filler content
- Drying and molding window
- Regrind policy
- Revision number and TDS issue date
The grade in the laboratory report must match the grade offered for production. If the supplier tested a natural-color sample but proposes a black production color, ask for evidence that the pigment system does not change flame, tracking or aging behavior.
Build the dual-85 qualification matrix
A credible qualification plan should be fixed before aging starts. At minimum, record:
| Qualification area | Evidence to request |
|---|---|
| Exposure | 85°C / 85% RH, duration, chamber calibration |
| Specimen | Type, thickness, color, conditioning and orientation |
| Mechanical | Tensile, flexural, impact and elongation before/after |
| Electrical | Insulation resistance and withstand voltage before/after |
| Flame | UL 94 at the production thickness and color |
| Appearance | Cracks, color shift, blooming and deformation |
| Dimensions | Critical dimensions and warpage before/after |
| End part | Actual molding, inserts, assembly and functional test |
The test duration should come from the application requirement. A 500 h result may support an early screening decision, but it cannot be presented as a 1000 h or 1500 h qualification.
Separate material data from part validation
A material supplier can provide TDS values and specimen-scale aging. The molder or end customer must still validate the production geometry. Weld lines, glass-fiber orientation, residual stress and insert design can cause a specimen to pass while a molded part fails.
For a CCS bracket, ask for the aged impact specimen geometry and whether the notch, direction and thickness match the real failure location. For an insulating film, ask whether the dielectric test was performed after creasing, die cutting or thermal exposure. For an insert-molded NTC bracket, inspect the interface between polymer and metal after cycling.
Audit the electrical evidence
Dual-85 exposure can change both surface and volume insulation behavior. The supplier should identify the test standard and report:
- Insulation resistance at the project voltage and duration
- Withstand voltage and leakage-current limit
- Specimen or part thickness
- Test environment and conditioning time
- Failure location and mode
High CTI is valuable for surface tracking resistance, but it does not replace a withstand-voltage test. The CTI tracking index guide explains why CTI, pollution degree, creepage and the final product geometry must be evaluated together.
Ask for production traceability
A test report is only useful if the material can be reproduced. The supplier should define incoming raw-material controls, lot numbering, compounding parameters, quality records and certificate traceability. For automotive projects, map these controls to IATF16949. For recycled or circular materials, keep the recycled-content certificate and transaction records separate from the quality-system certificate.
Ask for a sample traceability chain:
- Raw-material lot
- Compound batch
- Test specimen or molded part
- TDS revision
- Aging report
- Customer approval
The chain should remain intact during scale-up and color changes.
Compare supplier responses consistently
Use a scoring sheet rather than a narrative review. Score each supplier on grade definition, test completeness, part validation, electrical evidence, flame evidence, traceability, change notification and technical response time.
A supplier that provides a partial 500 h result with a clear test plan can be more credible than one that claims a 2000 h pass without specimen details. The objective is not to reward the largest number. It is to find the evidence that matches the part risk.
YONEI qualification example
YONEI's published EV material route includes CFR3010-901510 for CCS brackets and a PA66 + 20% GF direction for NTC brackets. Public project material data includes dual-85 1000 h aging, notched impact retention above 10 for the referenced CCS route, and a related PA66 V-0 program with -40°C to 85°C cycling and electrical tests.
These values remain grade- and geometry-specific. Start with the EV battery material page, then request the controlled TDS and build a part-level validation plan. The company validation capability explains how formulation, compounding, testing and production records are connected.
Approval decision
Approve a dual-85 supplier only when the exact grade, test method, aged property retention, electrical performance and production traceability support the component failure mode. A successful supplier package should make it possible for a second engineer to reproduce the test and understand why the material was accepted.
Standards and authoritative references
Verify the test method and current standard edition
These links lead to official standards bodies or their public catalogues. YONEI article conclusions should be read with the controlled TDS, current standard edition and project test plan.
- 01IEC Webstore — official standards catalogueInternational Electrotechnical Commission · Search the official catalogue for IEC 60112, IEC 60243-1, IEC 60068-2-78 and IEC 62852.
- 02UL 746A — Polymeric Materials: Short Term Property EvaluationsUL Standards & Engagement
- 03IATF 16949 automotive quality managementInternational Automotive Task Force
Engineering review
Turn the article into a validated material route
Share the part, wall thickness, operating environment and target standard. The YONEI R&D team will map the next material and testing step.
Talk to our R&D engineer