01
heat + rigidity
Motor and hot-air parts
Motor surrounds and air ducts combine heat, vibration and long-term dimensional requirements.
PA66 + 20%GF
SMART HOME
Flame, appearance and heat for appliance structures
From motor brackets and airflow parts to visible housings, smart appliances need a balance of flow, low odor, flame retardancy and dimensional stability.
V-0
@1.5 mm
20%GF
PA66 reinforcement
PFAS-free
PC FR direction
<0.1%
PPO water absorption
Operating conditions
Four critical conditions for Smart home
Each section follows the failure path for this application. Final targets depend on part design, wall thickness and the customer test plan.
02
V-0 + color
Housings and appearance
Visible parts need color consistency and surface quality alongside internal flame safety.
V-0 @1.5 mm
03
low absorption
Cleaners and moisture
Kitchen and cleaning equipment contact water, oils and detergents without swelling or blooming.
<0.1% water
04
balanced toughness
Assembly and drop
Snaps, screw bosses and thin walls must survive torque and complete-product drop tests.
Structural PA / PPO
Recommended materials
Recommended grades and data for Smart home
Data is sourced from product pages and technical documents. The series, suffix, color and thickness must be locked in the controlled TDS.
Structural route
A63V0GV20
FR PA66 + 20%GF · Motor brackets and structures
Key data
Structural route
A63V0GV20
FR PA66 + 20%GF · Motor brackets and structures
- Flame
- V-0 @1.5 mm
- Reinforcement
- 20% glass fiber
- System
- halogen-free, red-phosphorus-free
- Processing
- rigid, heat-resistant, easy demolding
Product data lists smart appliances, automotive, power batteries and electrical equipment as target applications.
FR option
CM9610PF
PFAS-free FR PC · FR housings and internal parts
- Flame
- V-0 @1.5 mm
- PFAS
- no PFAS / PTFE / bromine
- Mechanism
- phosphorus-nitrogen char
- Compliance
- RoHS / REACH / SCIP
Suitable for regulation-sensitive housings; validate against appliance-specific VOC, impact and aging requirements.
Low-absorption option
PX54F0HR
FR PPO / PPE · Control modules and precision parts
- Flame
- UL94 V-0
- Water absorption
- <0.1%
- Process
- injection / extrusion
- Electrical
- low dielectric loss
Low absorption and stable dielectric behavior suit connectors, controls and dimension-sensitive housings.
A63V0GV20 · Source: content-inventory: A63V0GV20 product page
CM9610PF · Source: content-inventory: CM9610PF product page
PX54F0HR · Source: content-inventory: PX54F0HR product page
Validation & certification
Test appliance structures and safety requirements separately
Visible, structural and electrical parts should not share a single material specification.
V-0 @1.5 mm
Flame
Documented direction for A63V0GV20 and CM9610PF.
20%GF
Rigidity
PA66 reinforcement for motor and load-bearing structures.
<0.1%
Dimensional stability
PX54F0HR water absorption allows stable dimensions.
RoHS / REACH
Compliance
Add local food-contact, VOC and appliance standards as needed.
ISO9001:2015IATF16949RoHSREACH
Public data and certificates do not replace project validation. Results apply only to the tested grade, color, thickness, specimen and conditions.
Technical data request
Request the controlled TDS for A63V0GV20
Share the part, operating conditions and targets. A specialist will verify suffix, thickness, regulations and test conditions before sending the document.
Application inquiry
Discuss Smart home with our team
More complete inputs move the project faster into sample and validation work.
- Part and thickness
- Continuous temperature
- FR thickness and color
- Detergent or oil exposure
Need general material guidance or company information?