Zum Hauptinhalt springen
YONEIINNOVATIVE MATERIAL TECH

Electrical performance

CTI Tracking Index Guide for High-Voltage Engineering Plastics

Learn how the CTI tracking index works, what UL PLC0 means and how to validate insulation for high-voltage parts.

9 minAktualisiert 2026-11-13Geprüft vom YONEI F&E-Team

What the CTI tracking index measures

The Comparative Tracking Index, or CTI, describes how well an insulating material resists the formation of a conductive carbonized path across its surface. The test simulates a contaminated insulating surface under electrical stress. A drop of electrolyte is placed between electrodes, voltage is applied and the material is observed for tracking, burning or failure.

CTI is not the same as dielectric strength. Dielectric strength describes voltage breakdown through an insulation volume. CTI describes surface tracking under contamination and moisture. A material can have high dielectric strength and still have poor tracking resistance if its surface carbonizes easily.

How the IEC 60112 test works

The commonly referenced method is IEC 60112. A specimen is placed horizontally, two platinum electrodes are positioned on the surface and an electrolyte solution is dripped between them. The test increases or selects voltage levels and records whether tracking occurs.

The result is affected by the material formulation, surface condition, electrode geometry, electrolyte, test procedure and specimen preparation. A CTI number should therefore be read together with the test standard, specimen thickness and laboratory report. It should not be treated as a property that applies unchanged to every color, surface texture or molded part.

What UL PLC0 means

UL 746A uses performance level categories, often called PLC, to group materials by their electrical performance. PLC0 is the highest tracking-resistance category associated with a CTI of 600V or higher. A material described as “CTI 600V / UL PLC0” has a high tracking-resistance direction, which can be valuable for compact high-voltage equipment.

PLC0 does not mean the complete product is safe at 600V. The engineer must still calculate creepage and clearance, define the pollution degree, consider altitude and overvoltage, and validate the final geometry. CTI helps the design; it does not replace the standard for the end product.

Why CTI matters in high-voltage equipment

High-voltage connectors, charging equipment and photovoltaic components often combine small spacing with outdoor contamination. Dust, salt fog, condensation and cleaning chemicals can create a conductive film. Under voltage, that film may produce tracking and gradually erode the insulation surface.

A material with higher CTI can provide more margin for a compact design. It can also reduce the risk of surface leakage after wet-heat aging. However, the benefit only appears when the connector geometry, sealing system and surface quality support it.

CTI in solar PV connectors

A photovoltaic connector is exposed to UV, temperature cycling, humidity and pollution. The material may also contain glass fiber, flame retardants and colorants that affect tracking behavior. This is why a connector material should be tested in the intended color and wall thickness.

The published CM9610S-BK3A475 route is a useful example of how CTI, UV weathering, low-temperature ductility and dual-85 aging belong in one material discussion. The solar PV connector material page organizes these requirements together instead of presenting CTI as a stand-alone headline.

CTI in EV charging and electrical housings

Charging equipment and electrical housings may use PC, PPS, PBT, PA or other engineering plastics. The material choice depends on the voltage, pollution degree, heat, flame rating and mechanical load. High CTI is often valuable, but a high-CTI grade with poor impact or hydrolysis resistance is not automatically the best route.

For a charging-station housing, the engineer should compare CTI, comparative tracking performance after aging, dielectric withstand, flame rating and impact. For a sealed connector, the sealing system may reduce contamination, but it does not eliminate the need to validate the material after thermal and humidity exposure.

How to interpret a CTI data sheet

When reviewing a supplier TDS, check:

Test standard

Confirm whether the value comes from IEC 60112, UL 746A or another method. Do not compare numbers from different methods without understanding the differences.

Specimen and thickness

Record the specimen geometry, thickness, color and conditioning. A thin or highly filled specimen may behave differently from a standard laboratory bar.

PLC category

Ask for the corresponding PLC category if the supplier markets a UL performance level. CTI and PLC are related but not identical data fields.

Post-aging performance

For wet or outdoor applications, request tracking or insulation data after the relevant aging exposure. A pre-aging value alone may not represent the service condition.

End-product context

Review the value with pollution degree, creepage, clearance, overvoltage category, altitude and the connector sealing design.

Material selection checklist

For a high-voltage engineering plastic, compare:

  1. CTI and PLC category.
  2. Dielectric strength and volume resistivity.
  3. Insulation resistance after humidity aging.
  4. UL 94 rating at the production thickness.
  5. Comparative tracking after UV and wet-heat exposure.
  6. Thermal aging and heat deflection.
  7. Impact strength before and after aging.
  8. Hydrolysis resistance for PA, PC and blend systems.
  9. Processability at the required wall thickness.
  10. Color and surface quality after molding.

Common mistakes

A common mistake is to specify “CTI 600V” without identifying the test standard or the expected product geometry. Another is to assume that a high CTI grade will perform the same in every color. Pigments and flame retardants can change tracking behavior.

A third mistake is to use CTI as a substitute for pollution-degree design. A connector with a high-CTI material but inadequate creepage can still fail. Finally, a material that passes a dry specimen test may not retain the same margin after long humidity exposure.

How to validate the final part

The validation plan should begin with the material TDS, then move to molded specimens and finally to the complete connector. Test the actual color and wall section. Condition the part under the intended thermal and humidity profile. Measure insulation resistance, withstand voltage and visual tracking damage. Inspect gasket compression, contact position and surface contamination.

For a PV or charging connector, combine CTI review with the application-level requirements in the solar connector material page. The page provides a practical path from material tracking resistance to environmental and flame validation.

Conclusion

CTI is a valuable screening metric for high-voltage insulation, but it is not a stand-alone approval. The engineer must link CTI to the test method, PLC category, production geometry and end-product standard. A material with CTI 600V is useful only when the complete connector retains insulation, flame and mechanical performance through the actual service environment.

Normen und autoritative Quellen

Prüfmethode und aktuelle Normausgabe verifizieren

Die Links führen zu offiziellen Normungsgremien oder öffentlichen Katalogen. Ergebnisse sind zusammen mit dem freigegebenen TDS, der aktuellen Normausgabe und dem Projektprüfplan zu bewerten.

  1. 01IEC Webstore — official standards catalogueInternational Electrotechnical Commission · Search the official catalogue for IEC 60112, IEC 60243-1, IEC 60068-2-78 and IEC 62852.
  2. 02UL 746A — Polymeric Materials: Short Term Property EvaluationsUL Standards & Engagement

Technische Prüfung

Den Artikel in einen validierten Materialweg überführen

Nennen Sie Bauteil, Wanddicke, Einsatzumgebung und Zielstandard. Das YONEI F&E-Team legt den nächsten Material- und Prüfschritt fest.

Mit einem F&E-Ingenieur sprechen

Sofortige technische Anfrage

Ingenieur verfügbar

YONEI

Hallo, hier ist YONEI Innovative Material. Welche Materiallösung benötigen Sie? Hinterlassen Sie Anforderung und Kontaktdaten; unser Ingenieur meldet sich schnellstmöglich.