Zum Hauptinhalt springen
YONEIINNOVATIVE MATERIAL TECH
Polycarbonate resin grades for charging, electrical and optical parts

PC resin / optical / FR / hydrolysis

PC Resin Grades for Demanding Injection-Molded Parts

Organize pc resin selection by optical clarity, flame retardancy, high flow and hydrolysis resistance. YONEI supports transparent, PFAS-free FR and outdoor electrical routes with grade-specific TDS review.

Discuss your application

Technische Daten

Anfrage CM9610PF TDS
Ihre Angaben werden nur für den Versand anwendungsbezogener technischer Informationen verwendet. Werte sind typisch und projektbezogen zu validieren.

V-0 @1.5 mm

FR PC route

CTI 600V

CM9630

1500 h

CM9610PF dual 85

Clear / color

optical options

Start PC resin selection with the optical and electrical target

PC resin covers a wide family of routes. Transparent grades prioritize clarity and impact; flame-retardant grades trade some optical freedom for V-0 and heat release control; high-flow grades support thin walls and long flow paths; hydrolysis-resistant grades support humid and outdoor service.

The final choice should be tied to color, thickness, UV exposure, CTI, impact after aging and regulatory limits. A clear natural sample is not evidence that a custom-colored production part will keep the same flame, toughness or appearance.

Core performance data

PC resin direction and published data

Each route is organized by the primary engineering problem it solves.

CM9610PF PFAS-free FR PC

01
Flame / electrical
V-0 @1.5 mm; PFAS/PTFE/bromine-free direction
Heat / impact
HDT >100°C; notched impact >45 kJ/m² at 23°C and >32 kJ/m² at -40°C
Aging / process
Dual-85 1500 h direction with tensile retention target
Best-fit application
Outdoor electrical housing and high-toughness FR enclosure

CM9630 FR / weathering PC

02
Flame / electrical
CTI 600V; IPT 1500V; V-0 @1.5 mm
Heat / impact
HDT 120°C @1.8 MPa; Charpy 58 kJ/m² at 23°C and 10 kJ/m² at -30°C
Aging / process
F1 weathering; MFR 10 g/10 min
Best-fit application
Charging housing and outdoor high-voltage structure

Clear PC program

03
Flame / electrical
Electrical grade by project
Heat / impact
Case route: HDT 126°C @1.8 MPa; Izod notched 810 J/m
Aging / process
UV and transparency by project
Best-fit application
Charging-station cover, light component and transparent housing

Hydrolysis-resistant PC program

04
Flame / electrical
CTI and flame by project
Heat / impact
Property retention and impact after wet heat to be confirmed
Aging / process
Dual-85 duration fixed by application
Best-fit application
Humid electrical housing and long-life outdoor component

Clear and custom-color parts can have different optical, flame and impact results. The controlled TDS and color sample are both required for approval.

Technische Daten

Anfrage CM9610PF TDS
Ihre Angaben werden nur für den Versand anwendungsbezogener technischer Informationen verwendet. Werte sind typisch und projektbezogen zu validieren.

Validated applications

Application evidence from production programs

Client identities remain withheld. Each case connects the part, operating condition, material route and validation result so engineering teams can assess whether the evidence is relevant.

Outdoor charging station and vehicle connector shown without brand identification

Validated case / 01

Application part

EV charging-station housing

Client profile

European Tier 1 charging-equipment supplier

Operating challenge

The housing required a natural transparent appearance, UV resistance, V-0 flame retardancy and high impact strength.

Material route

V-0 flame-retardant transparent PC

Core validation

HDT 126°C

At 1.8 MPa

Izod 810 J/m

Notched impact strength

V-0 @3 mm

Transparent flame-retardant route

Results apply to the referenced program. Final material, color, thickness and test conditions must be confirmed in the controlled TDS.

Discuss a similar project
Security monitoring equipment using an infrared-transmissive PC lens

Validated case / 02

Application part

Robot vacuum and security-monitor infrared lens

Client profile

Leading smart-home brand

Operating challenge

The lens needed infrared transmission, drop-resistant toughness and UV stability.

Material route

Infrared-transmissive PC

Core validation

RTI 120

Relative thermal index

UV F1

Outdoor UV resistance

V-2 / V-0

Flame-rating direction

Results apply to the referenced program. Final material, color, thickness and test conditions must be confirmed in the controlled TDS.

Discuss a similar project
01

Transparent PC versus flame-retardant or high-flow routes

Transparent PC is selected for optical clarity, impact and design freedom. Flame retardants, opacifiers and impact modifiers can reduce transparency or shift color, so a transparent grade should not be assumed to deliver V-0 without the matching TDS.

High-flow PC helps fill thin walls and long paths, but the flow target must be balanced against impact and hydrolysis. For outdoor parts, the weathering package and UV requirement should be included from the first sample.

02

Hydrolysis-resistant PC requires an aging result

Hydrolysis resistance cannot be inferred from a generic PC description. The grade should be tested in the intended dual-85 duration and color, with comparison of tensile or impact retention, appearance and electrical performance.

CM9610PF is a relevant published route for wet-heat and FR evaluation, while CM9630 addresses CTI 600V, IPT 1500V and F1 weathering. The actual selection still depends on wall thickness and end-product requirements.

Product inquiry

Share the part and target data for a grade review

Include wall thickness, process, flame, heat, impact and regulatory requirements. The controlled TDS and sample route follow the application review.

  • Part geometry and production wall
  • Performance and regulatory target
  • Color, surface and process
  • Annual volume and project timing

Sofortige technische Anfrage

Ingenieur verfügbar

YONEI

Hallo, hier ist YONEI Innovative Material. Welche Materiallösung benötigen Sie? Hinterlassen Sie Anforderung und Kontaktdaten; unser Ingenieur meldet sich schnellstmöglich.