Ir al contenido principal
YONEIINNOVATIVE MATERIAL TECH
PA66 material selection for solar and electrical connectors

PA66 / glass fiber / flame retardant

PA66 Material for Connectors and Structural Parts

YONEI develops PA66 material systems for connector pa66 programs, including PA66 FR, PA66 GF25 connector grades and project-specific PA66 MX GF40 and PA66 6F50 routes. Selection balances stiffness, warpage, moisture, flame performance and processing.

Discuss your application

Datos técnicos

Solicitar PA66 GF25 connector program TDS
Sus datos se utilizan únicamente para enviar información técnica relacionada. Los valores son típicos y requieren validación.

GF25–GF50

reinforcement range

V-0 @1.5 mm

FR PA66 direction

PA66 FR

halogen-free options

Project TDS

hydrolysis validation

Choose PA66 by failure mode, not glass content alone

PA66 material selection starts with the part: connector housing, thin-wall charger component, structural frame or high-temperature electrical part. Glass content improves stiffness and dimensional control, but also changes warpage, weld-line behavior, surface appearance and tooling requirements.

YONEI evaluates PA66 FR, PA66 GF25 connector, PA66 MX GF40 and PA66 6F50 routes against the actual wall thickness, moisture exposure, flame target and assembly load. Published values remain a screening reference until the controlled grade, color and specimen conditions are confirmed.

Core performance data

PA66 grade comparison

The table separates directly published program data from project-specific routes that require a controlled TDS.

PA66 GF25 connector program

01
Reinforcement
25% glass fiber
Flame / electrical
Charging-gun program: V-0 @0.8 mm; 5VA @1.5 mm
Heat / mechanical
HDT 240°C @1.8 MPa; Charpy notched 9 kJ/m²
Best-fit application
Thin-wall charging gun, connector body and dimension-critical housing

PA66 MX GF40 / GF40

02
Reinforcement
40% mineral/glass or glass reinforcement
Flame / electrical
Grade-specific
Heat / mechanical
Low-warp and high-rigidity direction; confirm controlled TDS
Best-fit application
Flat structural parts, brackets and precision housings

PA66 6F50 / GF50

03
Reinforcement
50% glass fiber
Flame / electrical
Grade-specific
Heat / mechanical
High modulus and high-strength structural route; confirm controlled TDS
Best-fit application
Structural frames, reinforcement ribs and metal-replacement parts

PA66 FR A63V0GV20

04
Reinforcement
20% glass fiber
Flame / electrical
V-0 @1.5 mm; halogen-free and red-phosphorus-free
Heat / mechanical
Rigid, heat-resistant and easy demolding
Best-fit application
Motor brackets, electrical structures and appliance components

Hydrolysis-resistant connector route

05
Reinforcement
Glass-fiber content by project
Flame / electrical
Insulation and CTI target by project
Heat / mechanical
Dual-85 1000 h or 1500 h target; property retention to be confirmed
Best-fit application
Solar connector, charging component and humid electrical housing

PA66 absorbs moisture. Drying, storage, molding window and conditioned-state testing must be fixed before comparing grades or approving production.

Datos técnicos

Solicitar PA66 GF25 connector program TDS
Sus datos se utilizan únicamente para enviar información técnica relacionada. Los valores son típicos y requieren validación.

Validated applications

Application evidence from production programs

Client identities remain withheld. Each case connects the part, operating condition, material route and validation result so engineering teams can assess whether the evidence is relevant.

Molded PA66 NTC bracket for a power-battery assembly

Validated case / 01

Application part

Power-battery NTC bracket

Client profile

Global leading new-energy vehicle manufacturer

Operating challenge

Repeated -40 to 85°C cycles and damp heat created cracking risk. The part also required high rigidity and electrical insulation.

Material route

PA66 + 20% GF, V-0 flame-retardant grade

Core validation

-40 to 85°C / 1000 h

No cracking

Dual 85 / 1000 h

No cracking

1000 VDC / 60 s

Resistance ≥1000 MΩ

2700 VDC / 60 s

Leakage ≤0.1 mA

See how this material performs in full EV battery applications.

Results apply to the referenced program. Final material, color, thickness and test conditions must be confirmed in the controlled TDS.

Discuss a similar project
Glass-fiber reinforced PA66 component with molded metal inserts

Validated case / 02

Application part

New-energy motor copper-bar assembly

Client profile

New-energy commercial-vehicle supplier

Operating challenge

The component required metal-insert injection molding, flame retardancy, heat resistance and high mechanical strength.

Material route

PA66 + 25% GF, V-0 red-phosphorus flame-retardant route

Core validation

V-0 @0.75 mm

UL 94 flame rating

HDT 230°C

Heat deflection temperature

25% GF

Glass-fiber reinforcement

Results apply to the referenced program. Final material, color, thickness and test conditions must be confirmed in the controlled TDS.

Discuss a similar project
01

How PA66 GF25 is used in solar connectors

A PA66 GF25 connector grade gives engineers a practical balance between stiffness and toughness. The glass fiber network improves dimensional stability and creep resistance, while the polyamide matrix supports the latching, sealing and assembly loads used by MC4 and other photovoltaic connector designs.

For outdoor connectors, PA66 GF25 should not be selected from glass content alone. The grade must also be checked for hydrolysis resistance, CTI, UV and moisture exposure, insulation resistance, low-temperature impact and compatibility with the connector sealing system. Validation should compare property retention after dual-85 aging, not just confirm that the specimen remains intact.

When a supplier can lock the glass type, heat stabilizer, impact modifier and color masterbatch, PA66 GF25 becomes a credible support route for the solar connector scenario. Final approval still requires the actual connector geometry, wall section and customer test plan.

02

How to separate GF40, GF50 and FR PA66 routes

GF40 and GF50 are normally considered when stiffness, creep and dimensional control outweigh surface finish and elongation. They suit structural frames and highly loaded housings, while GF25 is often a better starting point for connector bodies that need a more balanced stiffness-toughness profile.

PA66 FR is a separate selection axis. A flame-retardant package may change flow, impact, color and electrical behavior. The controlled TDS must identify the flame rating at the actual wall thickness and the electrical values required by the connector or equipment standard.

Product inquiry

Share the part and target data for a grade review

Include wall thickness, process, flame, heat, impact and regulatory requirements. The controlled TDS and sample route follow the application review.

  • Part geometry and production wall
  • Performance and regulatory target
  • Color, surface and process
  • Annual volume and project timing

Consulta técnica instantánea

Ingeniero disponible

YONEI

Hola, somos YONEI Innovative Material. ¿Qué solución de material necesita? Déjenos su requisito y datos de contacto; un ingeniero responderá lo antes posible.